Ricoh A085, Manual

Page: 423 / 617

Mode No. Function Data
84 Editing Eraser
Enables edit erase lamp unit operation.
(The copier CPU automatically enables edit
erase lamp unit when the editor is installed.)
0: No
1: Yes
85 TEL No.
Use to input the telephone number of the
service depot.
(Pressing "
•
" key shows "–" in the guidance
display.)
•
86
Under Color
Density
Adjusts color background density in highlight
color mode of editor.
(Only effective when the editor is installed.
Each color can have an independent under
color density.
Adjusted under color density corresponds to
the color development unit installed in the
copier.)
1: Darkest
–
4: Normal
–
7: Lightest
87 PM Interval Sets the interval of the PM counter.
0: No PM
1: 60 K
2: 80 K
3: 100 K
4: 120 k
88 PM Counter
Displays contents of the PM counter.
(When entering this mode by pressing the "#"
key, the first three digits are displayed in the
three digit indicator.
Hold down the "
•
" key to display the second
three digits.
When the PM counter is exceeded, the call
service indicator blinks and the key counter
indicator lights.)
89 PM Counter Clear
Resets the PM counter.
(Use this mode after performing PM.
Beeper sounds 2 times when this function is
used.)
90 User Code Mode
Enables user code mode (Key counter
shorting connector must be removed.)
(If this mode is set, a user must enter a code
to make copies.
Resets when auto clear mode functions or
when C/S and clear mode keys are pressed
together.
The user codes are the following 20 numbers:
1101, 1202, 1303, 1404, 1505, 1606, 1707,
1808, 1909, 2010, 2111, 2212, 2313, 2414,
2515, 2616, 2717, 2818, 2919, 3020).
0: No
1: Yes
SERVICE PROGRAM MODE 12 February 1992
4-20