Mode No.
Function
Data
•
11
All Indicators ON
Turns on all the indicators on the operation
panel.
(To turn off the indicators, press the "# " key.)
13
A3/DLT Double
Count
Selects single or double count for the total
counter and key counter in A3/11" x 17"
copying.
(Double count is not applied for copies from
the by-pass feed table.
Double count is applied to the user code
counter [SP91] and the mechanical counters.)
0: Single
1: Double
•
14
Manual Staple
Reset
Selects accessible period for manual stapling
after completing a copy job in sort mode.
(Only when the sorter stapler is installed.)
0: 20 sec.
1: 1 min.
2: None
•
15
Auto Reset
Selects auto reset time of 1 or 3 minutes, or
cancels this mode.
0: 1 min.
1: 3 min.
2: None
•
16
Count Up/Down
Selects count up or count down.
0: Up
1: Down
•
17
Auto Cassette Shift
Selects auto cassette shift mode.
(Copier automatically shifts to the LCT or
paper tray holding the same size paper when
paper runs out.)
0: Yes
1: No
•
19
ID Mode
Specifies whether the copier defaults to ADS or
manual ID mode when the main switch is
turned on.
0: ADS
1: Manual
•
20
LCT Priority
Sets the feed station priority to LCT or the 1st
tray.
0: On
1: Off
•
21
APS Priority
(Copier)
Specifies whether the copier defaults to APS or
manual mode when the main switch is turned
on.
0: APS
1: Manual
2: No
22
SADF Auto Reset
Selects auto reset time for SADF mode.
0: 5 sec.
1: 60 sec
23
ADF Free Size
Enables originals of various sizes to be fed
from the same width stack.
(When this mode is enabled, the job interval for
each original increases.)
0: No
1: Yes
24
Side Edge Erase
Selects the width of the side erase margin in
Erase Edge mode (Program key + 7 + # ) or
Erase Center And Edge mode (Program key +
8 + # ).
(0:10 mm (A3, A4, B4, B5 lengthwise)
15 mm (11"X17", 11"X8 1/2" sideways)
13 mm (8 1/2"X14", 8 1/2"X11" lengthwise)
11 mm (F)
1:5 mm (A3, A4, B4, B5 lengthwise)
9 mm (11"X17", 11"X8 1/2" sideways)
8 mm (8 1/2"X14", 8 1/2"X11" lengthwise)
7 mm (F))
0: Normal
1: Narrow
SERVICE PROGRAM MODE
10 July 1992
4-4
Summary of Contents for A085
