Ricoh A085, Manual

Page: 417 / 617

Mode No. Function Data
•
21
APS Priority
(Copier)
Specifies whether the copier defaults to APS
or manual mode when the main switch is
turned on. 0: APS
1: Manual
2: No
22 SADF Auto Reset Selects auto reset time for SADF mode.
0: 5 sec.
1: 60 sec
23 ADF Free Size
Enables originals of various sizes to be fed
from the same width stack.
(When this mode is enabled, the job interval
for each original increases.)
0: No
1: Yes
24
Overlay Border
Erase
Makes a white frame on the border line when
using "Black in area" or "Color in area" mode.
(Only when the editor is installed.)
0: No
1: Yes
25 Staple Limit
Sets the staple limit of copies in each bin in
staple mode.
(Only when the sorter stapler is installed.)
0: Yes (30
copies)
1: No (50
copies)
•
26
Auto APS Select
(ADF)
Selects the priority of APS mode when
originals are set on the ADF.
(Only when the ADF is installed.)
0: Yes
1: No
•
27
Overlay Series
Priority
Sets the priority of series copying in overlay
mode.
(For type 2 copiers only)
0: No
1: Yes
28
Auto Sort Select
(ADF)
Sort Mode is automatically selected when
more than 1 original is set on the ADF and the
entered copy quantity is greater than 1 and
less than 21 (11 for the micro sorter).
(Sorter and ADF must be installed on the
machine.
When in duplex 1 [1-sided original mode] or
overlay mode, more than 2 originals must be
set.)
0: Manual
1: Auto Sort
29 Zero Cross Control
Selects fusing temperature control mode.
(After selecting the control mode and turning
the main switch off/on, the fusing temperature
control mode changes.)
0: Yes
(Zero
cross)
1: No
(Phase)
30
Black Toner
Supply Mode Selects black toner supply mode.
(See SP 31/SP32 for toner supply amount.)
0: Detect
Mode
1: Fixed Mode
31
Black Toner
Supply Ratio
(Detect Mode)
Determines how much toner is supplied in
detect mode.
0: 15%
1: 7%
2: 30%
3: 60%
32
Black Toner
Supply Ratio
(Fixed Mode)
Determines how much toner is supplied in
fixed mode.
0: 7.0%
1: 3.5%
2: 10.5%
3: 14.0%
SERVICE PROGRAM MODE 12 February 1992
4-14