Ricoh A085, Manual

Page: 183 / 617

Mode No. Function Data
25 Staple Limit
Sets the staple limit of copies in each bin, in
staple mode.
(Only when the sorter stapler is installed.)
Yes: 20 sheets, No: 25 sheets for A4, B5, and
8
1/2
" x 11"
Yes: 10 sheets, No: 15 sheets for B4, A3, 8
1/2
"
x 14", and 11" x 17"
0: Yes
1: No
•
26
Auto APS Select
(ADF)
Selects the priority of APS mode when
originals are set on the ADF.
(Only when the ADF is installed.)
0: Yes
1: No
28
Auto Sort Select
(ADF)
Sort Mode is automatically selected when
more than 1 original is set on the ADF and the
entered copy quantity is greater than 1 and
less than 21 (11 for the micro sorter).
(Sorter and ADF must be installed on the
machine.
When in duplex 1 [1-sided original mode],
more than 2 originals must be set.)
0: Manual
1: Auto Sort
29 Zero Cross Control
Selects fusing temperature control mode.
(After selecting the control mode and turning
the main switch off/on, the fusing temperature
control mode changes.)
0: Yes
(Zero
cross)
1: No
(Phase)
30
Black Toner
Supply Mode Selects black toner supply mode.
(See SP 31/SP32 for toner supply amount.)
0: Detect
Mode
1: Fixed Mode
31
Black Toner
Supply Ratio
(Detect Mode)
Determines how much toner is supplied in
detect mode.
0: 15%
1: 7%
2: 30%
3: 60%
32
Black Toner
Supply Ratio
(Fixed Mode)
Determines how much toner is supplied in
fixed mode.
0: 7.0%
1: 3.5%
2: 10.5%
3: 14.0%
33
Black (ID sensor)
Pattern Bias
Sets the bias voltage applied to the
development roller for the ID sensor pattern.
(0: –200 V= Normal
1: –160 V= Lighter
2: –220 V= Darker
3: –240 V= Darkest)
0: N
1: L
2: H
3: HH
•
34 ADS Density
Selects the image density level in ADS mode.
(Data 1: Increases charge grid voltage [–50 V].
Development bias voltage has standard value.
Data 2: Increases development bias voltage
[–40 V]. Charge grid voltage has standard
value.)
0: N (Normal)
1: H (Darker)
2: L (Lighter)
35 Black ID Detection
Black ID sensor check is performed every 5
copies or 10 copies.
(If low image density occurs in the toner near
end condition, change the data to "1".)
0: 10 copies
1: 5 copies
10 July 1992 SERVICE PROGRAM MODE
4-5