Ricoh A085, Manual

Page: 416 / 617

Mode No. Function Data
10
Color Developer
Initialize
Agitates new color developer for about 1
minute.
Press the start key to begin operation.
(This must be done when new color developer
is put in.
Beeper sounds 5 times when initialization is
completed.)
•
11 All Indicators ON
Turns on all the indicators on the operation
panel.
(To turn off the indicators, press the "#" key.)
12 Language
Selects the language displayed in the
guidance display.
(SP12 applies to type 2 copiers only.
For other languages the optional ROM is
required.)
0: Japanese
1: English
2: French
3: German
4: Italian
5: Spanish
[Other
Languages]
0:
1:
2:
3:
4:
5:
13
A3/DLT Double
Count
Selects single or double count for the total
counter and key counter in A3/11" x 17"
copying.
(Double count is not applied for copies from
the by-pass feed table.
Double count is applied to the user code
counter [SP91] and the mechanical counters.)
0: Single
1: Double
•
14
Manual Staple
Reset
Selects accessible period for manual stapling
after completing a copy job in sort mode.
(Only when the sorter stapler is installed.)
0: 20 sec.
1: 1 min.
2: None
•
15
Auto Reset
Selects auto reset time of 1 or 3 minutes, or
cancels this mode.
0: 1 min.
1: 3 min.
2: None
•
16 Count Up/Down Selects count up or count down.
0: Up
1: Down
•
17 Auto Cassette Shift
Selects auto cassette shift mode.
(Copier automatically shifts to the LCT or
paper tray holding the same size paper when
paper runs out.)
0: Yes
1: No
•
18 Beeper On Turns beeper on or off.
0: On
1: Off
•
19
ID Mode
Specifies whether the copier defaults to ADS
or manual ID mode when the main switch is
turned on.
0: ADS
1: Manual
•
20
LCT Priority
Sets the feed station priority to LCT or the 1st
tray. 0: On
1: Off
Service
Tables
12 February 1992 SERVICE PROGRAM MODE
4-13