Ricoh A085, Manual

Page: 420 / 617

Mode No. Function Data
53
Drum Temperature
Check
❐
Displays the temperature around the drum. [°C]
54
Auto Vsg/Vlg
Adjustment
❐
Adjusts Vsg of ID sensor and Vlg of V sensor
automatically at once.
(Adjusted PWM values of ID sensor and V
sensor are displayed in the three digit
indicator.
Beeper sounds 2 times when the adjustments
[about 4 sec.] are completed.)
55 Vsp/Vsg Data
❐
Displays the Vsg and Vsp readings.
The Vsg reading is displayed while the "0" key
is held down.
(When making copies, the Vsp and Vsg
voltage readings are updated every 10 or 5
copies [ID sensor check timing].)
[V]
56
Auto ADS Gain
Adjustment
Adjusts ADS gain data automatically when the
start key is pressed.
(Close the platen cover to prevent external
light from reaching the ADS sensor when
performing this adjustment.
The gain data is displayed in the three digit
counter.
Beeper sounds 2 times when the adjustment
[about 4 sec.] is completed.)
57
Auto Drum Current
Adjustment
Adjusts the transfer and separation corona
currents automatically.
Press the start key to perform.
(When the high voltage supply board [CTBG]
and/or [D] is replaced, perform this mode after
setting the data of SP62.
When separation corona current adjustment
fails, beeper sounds twice and the copier tries
the adjustment again.
Beeper sounds twice when the adjustment is
completed.)
[Display only]
1: Measuring
and adjusting
the transfer
corona
current.
2: Measuring
and adjusting
the separation
corona
current.
3: Completed
58
Toner End
Counter Check
Displays the contents of the black toner end
counter.
(Toner end condition is not counted if the toner
end condition happens within 250 copies after
the previous toner end condition.)
59
Bias Voltage
Check
❐
Displays bias voltage. Press the Start key to
display the bias voltage. Press the C/S key to
stop.
[V]
Service
Tables
12 February 1992 SERVICE PROGRAM MODE
4-17