Rice Lake IDIMENSION 200, Installation Manual

Page: 57 / 72

54 iDimension 300
This is similar to automatic triggering with the addition of requiring the capture method to be called by the
client application.
The capture definition that controls what gets captured is specified as a parameter to the capture call in a client
application.
A capture definition is used to describe the process that will apply to an item after it has been detected.
The following processing options can be applied:
• Dimensioning
• Low resolution image
• High resolution image
• Bar code recognition
There are four predefined profiles, but it is possible to create new ones depending on the application processing
requirements.
Figure 5-32. Capture Definitions Menu
Capture Definition Use
autotriggerflat Used for items with a height less than the flat/parcel threshold when automatic triggering is
enabled.
autotriggerparcel Used for items with a height larger than the flat/parcel threshold when automatic triggering is
enabled.
QVDemo Used when Capture button is pressed in QubeVu Manager Demo.
QVCapture Used when Scan button is pressed in capture application.
Table 5-21. Pre-Defined Capture Definitions
Note