Rice Lake IDIMENSION 200, Installation Manual

Page: 20 / 72

Calibration 17
10. Hold down the left mouse button and drag the mouse to draw a rectangle around the calibration object.
Figure 3-9. Draw a Rectangle around the Calibration Object
11. Press
Calibrate
.
Figure 3-10. Camera Calibration
12. All three tabs must show the green check mark for the calibration to be successful. Review each tab to
ensure that the calibration object was successfully captured and no other object has mistakenly been placed
in the view of the cameras.
Figure 3-11. Calibration Successful