Rice Lake IDIMENSION 200, Installation Manual

Page: 10 / 72

Installation 7
Selecting
Restart
will restart the service that is running on the device;
Reboot
will reboot the full operating system
on the device. Rebooting can take several minutes.
Information Button
The
Information Button
on the top right of every screen shows information about the
iDimension 300
device,
including the firmware version number, the firmware CRC, the serial number and the certificate number. To exit
from this screen, click on the “x” in the upper right section of the information screen.
Figure 2-5. iDimension 300 Information Screen
Inspector
The inspector button takes the user to a series of screens where the device and change information can be viewed.
Changes to the following items will be logged:
• Measurement settings
• Calibration
• Firmware upgrades
See "Inspector" on page 66 for more information.