Rice Lake IDIMENSION 200, Installation Manual

Page: 13 / 72

10 iDimension 300
Network Security Tab
Network security settings enable more secure and encrypted communications with
iDimension 300
using the HTTPS
protocol. By default, communication with
iDimension 300
is via HTTP.
When you click on the
Network Security
tab, the current settings are displayed.
Click on
Enable HTTPS
to enable HTTPS. Enter the file name of the key file, certificate file and key pass phrase.
Select
Upload
to transfer the information from the local machine to
iDimension 300
.
Figure 2-11. Network Security Tab
Network Description
DHCP
Verify with the network administrator if iDimension 300 should be set up on the net-
work using Dynamic Host Configuration Protocol (DHCP).
If DHCP is checked, a unique hostname for this device must be defined. This name
will be used to access the device from the
Manager Tools in the future. A hostname
can be up to 15 characters.
For example,
http://<hostname>/
IP Address If DHCP was checked, an IP address will not be entered.
If DHCP was not checked, define a unique IP address for each
iDimension 300
that
is installed. Consult with the network administrator if unsure how to assign a new IP
address.
If using fixed IP addresses, access iDimension 300 manager by either the hostname
or the IP address:
http://<hostname>/
http://<ip address>/
Subnet Mask The default subnet mask is 255.255.255.0. Consult with the network administrator
for the correct setting.
Hardware Address
Each iDimension 300 has been assigned a unique hardware address. Do not change
this setting.
Hostname The default hostname is the alphanumeric part of the device serial number.
Up to 15 characters are allowed for the hostname.
Table 2-2. Network Settings