Rice Lake IDIMENSION 200, Installation Manual

Page: 41 / 72

38 iDimension 300
Troubleshooting Image Quality
5.3.3 Set the Date, Time and Time Zone
The Date/Time tab allows the date and time setting to be changed. The date and time are used to time stamp
configuration changes that affect the Legal for Trade certification.
Figure 5-13. Date/Time Tab
Exposure setting using default value of 136.
Image exposure set using “best setting” function. In this case, the default value
was sufficient.
This image is over-exposed.
This image is under-exposed.
Image 1
Image 2
The squares are slightly distorted in Image 1, as the paper was at a slight angle.
Once the paper is straightened, the squares should look even as in Image 2.
Table 5-9. Troubleshooting Image Quality