Rice Lake IDIMENSION 200, Installation Manual

Page: 49 / 72

46 iDimension 300
5.4.2 Calibration
Figure 5-19. Calibration Tool Main Menu
Use the calibration tool to set the camera settings and to calibrate the depth, low resolution and high resolution
cameras. This is typically done at setup; however, if the unit is moved to a new location or the type of scale has
changed, the calibration settings should be checked to ensure correct calibration.
Calibration Settings
Figure 5-20. Calibration Settings Menu
Parameters Description Values
Dimension Up (%) A low-pass filter is applied to the three dimensions of the object from every single
frame that is captured. This is intended to overcome noise and further improve
accuracy. These two parameters (up and down) control the speed of this low-pass
filter as a percentage. The closer to 100%, the faster the filter’s response; the closer
to 0%, the slower the filter’s response.
Default Value: 70%
Valid Values: 0-100%
Dimension Down (%)
Table 5-18. Dimensioning
Parameters Description Values
Lock Motion (%)
The motion threshold value below which the system must settle in order to lock
onto an object. Default Value: 1%
Valid Values: 0-100%
Table 5-19. Locking