manualshive.com logo in svg

Rice Lake IDIMENSION 200, Installation Manual

Share
Download
Rice Lake IDIMENSION 200 Installation Manual Download Page 29

26

iDimension 300

5.0

Administrator’s Section

5.1

Installation

QubeVu Manager is a set of tools provided to set up and configure the 

iDimension 300

 in any environment. These

tools are recommended for use by a technical systems administrator.

5.1.1

QubeVu Manager

Each unit is defined as a network device during the initial installation and setup. Contact the Administrator for
details of how to connect (via a IP address or host name).

It is not necessary to install additional software on the PC being used. Simply connect the unit to the PC using the
Ethernet cable provided. The QubeVu Manager tools will run via any compatible browser. 

Open an Internet browser. Enter the address or host name in the address area. The following screen displays as the
main menu. 

Figure 5-1. QubeVu Manager Home Page

Navigation

There is a navigation menu in the upper left section of the page. This allows users to keep track of their current
location and provides links back to each preceding page. 

For example, in the image below, the user is in the Calibration screeen. They can select 

Admin Tools 

and return to the

Admin Tools menu, or QubeVu Manager to return to the home page. 

Figure 5-2. Navigation Menu

Summary of Contents for IDIMENSION 200









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands