2. To change the IP Address of the DC-200/300, press the
Edit
button. Enter the new address in the IP
Address field.
Figure 6-1. Machine Setup Utility
3. After entering the new address, press the
SAVE
button.
6.1.3
Changing the IP Address Directly on the Scale
To change the IP address of the DC-200/300 scale using the Machine Setup Utility program that is in the Service
Tools Folder on your DC-300 Setup Tools CD-ROM, see Section 6.1.2. The scale’s IP address can also be
changed direcly on the scale itself.
In most situations you will be able to simply use the DC-300’s default IP Address of 192.168.00.1. The Machine
Setup Utility is only necessary if you need to change the IP address of the scale to avoid conflicts on your
network. If you are not sure whether the IP address needs to be changed, please talk to your Network
Administrator.
To change the IP address of the DC-200/300 directly from the keyboard of the scale, follow the instructions
below:
1. Press the
MODE
key three times. The scale will display
SERVICE MODE
. While holding down the
REZERO
key, enter
0416
. The display will show the Scale IP Address. Unless you have modified it as
explained in Section 6.1.2, it should show the default address which is 192168001000 for the DC-300 or
192168000002 for the DC-200.
2. To change the IP address, enter a new one from the numeric keypad. Note that the digits you enter will
show up starting with the fourth character to the right. The last three digits represent the port number and
are set by setting
SPEC 41 - PORT NUMBER (IP)
. See Section 2.9.1 for information on how to change the
scale’s SPEC settings.
3. To save the changes and exit the IP Address display, press the
CODE
key. To exit without saving your
changes, press the
TARE
key. Then press the
MODE
key twice to return to the normal or weighing mode.
All manuals and user guides at all-guides.com
