use the
+
(plus) and
–
(minus) keys to scroll through the specifications until you find the one you want.
Then make your changes per the instructions in Step 1.
3. To change another SPEC code before exiting, repeat Steps 1 and 2.
4. To save all the changed SPEC settings currently in temporary memory and exit to the Operation Mode,
press the
CODE
key. You will hear a long beep to confirm that the scale is saving the change. The saving
of the configuration file takes about 10 seconds, after which the scale will return to the Stand-By mode.
To exit to the Operation Mode without saving the changes, press the
TARE
key.
If you power off the scale while the saving process is going on, you can clear the entire
memory of the scale. Wait until the scale has returned to the Stand-by screen before
performing any other functions.
5. Power down scale using the power switch on the back of the bottom of the scale, not the
ON/OFF
key on
the keyboard.
6. Power scale on to re-initialize the new specification settings.
Caution
All manuals and user guides at all-guides.com
