Renesas SuperH SH-4A Software Manual Download

Page: 458 / 472

Rev. 1.50, 10/04, page 438 of 448

Item Page

Revision

(See Manual for Details)

Table 1.2 Changes from SH-4 to
SH-4A

6 Added.

Section No. and
Name Sub-section

Sub-section
Name Changes

8.3.6 OC

Two-Way

Mode

Newly added.

8.4 Instruction

Cache

Operation

IC index mode is
deleted.

8.4.3 IC

Two-Way

Mode

Newly added.

8.5.1 Coherency

between Cache
and External
Memory

The ICBI, PREFI, and
SYNCO instructions are
added.

8. Caches

8.6 Memory-Mapped

Cache
Configuration

The entry bits and the
way bits are modified
according to the size
modification and
changed into 4-way set
associative cache.

8.8

Notes on Using
32-Bit Address
Extended Mode

Newly added.

9. L Memory



Newly

added.

9 instructions are added
as CPU instructions.

10. Instruction
Descriptions



3 instructions are added
as FPU instructions.

2.2.4 Control Registers

Status Register (SR)

15 Amended.

Bit Bit

Name

Initial
Value R/W

Description

1 S

0 R/W

Bit

Used by the MAC instruction.

0 T

0 R/W

Bit

Indicates true/false condition,
carry/borrow, or
overflow/underflow.

For details, see section 3,
Instruction Set.

2.2.5 System Registers

Floating-Point Status/Control
Register (FPSCR)

18 Amended.

2.7 Usage Notes

Added.

Summary of Contents for SuperH SH-4A

























































































































































































































































































































































































































































































Search results

Summary of Contents for SuperH SH-4A

Reviews:

Related manuals for SuperH SH-4A

Brands by name

Popular brands

Renesas SuperH SH-4A, Software Manual

Search results

Summary of Contents for SuperH SH-4A

Reviews:

Related manuals for SuperH SH-4A

Brands by name

Popular brands