Renesas SuperH SH-4A Software Manual Download

Page: 26 / 472

Rev. 1.50, 10/04, page 6 of 448

Section No. and
Name

Sub-
section

Sub-section
Name Changes

Instruction cache capacity is changed to 32
Kbytes.

8.1 Features

The caching method is changed to a 4-way
set-associative method.

8.2 Register

Descriptions

An on-chip memory control register is
added.

8.2.1 Cache

Control

Modified.

(Descriptions in CCR are modified.)

8.2.4 On-Chip

Memory

Control Register
(RAMCR)

Newly added.

8.3 Operand

Cache

Operation

RAM mode and OC index mode are
deleted.

8.3.6 OC

Two-Way

Mode

Newly added.

8.4 Instruction

Cache

Operation

IC index mode is deleted.

8.4.3

IC Two-Way Mode Newly added.

8.5.1 Coherency

between Cache
and External
Memory

The ICBI, PREFI, and SYNCO instructions
are added.

8. Caches

8.6 Memory-Mapped

Cache
Configuration

The entry bits and the way bits are modified
according to the size modification and
changed into 4-way set associative cache.

8.8

Notes on Using
32-Bit Address
Extended Mode

Newly added.

9. L Memory



Newly

added.

9 instructions are added as CPU
instructions.

10. Instruction
Descriptions



3 instructions are added as FPU
instructions.

Summary of Contents for SuperH SH-4A

























































































































































































































































































































































































































































































Search results

Summary of Contents for SuperH SH-4A

Reviews:

Related manuals for SuperH SH-4A

Brands by name

Popular brands

Renesas SuperH SH-4A, Software Manual

Search results

Summary of Contents for SuperH SH-4A

Reviews:

Related manuals for SuperH SH-4A

Brands by name

Popular brands