159
f) Switching the menu
The helicopter mode, there are 9 different menu items for programming. To choose this function, first switch on the
transmitter.
Press the "UP" and "DN" buttons at once to access the "servo reverse" menu
Press the "UP" and "DN" buttons at once twice to access the "full deflection" menu
Press the "UP" and "DN" buttons at once three times to access the "servo centre settings" menu
Press the "UP" and "DN" buttons at once four times to access the "dual rate" menu
Press the "UP" and "DN" buttons at once five times to access the "throttle hold" menu
Press the "UP" and "DN" buttons at once six times to access the "gyro sensitivity" menu
Press the "UP" and "DN" buttons at once seven times to access the "gas curve" menu
Press the "UP" and "DN" buttons at once eight times to access the "pitch curve" menu
Press the "UP" and "DN" buttons at once nine times to access the "swash plate sensitivity" menu
Press the "UP" and "DN" buttons at once ten times to access the "normal" menu
If you want to return to normal mode after a programming step, press the "INC" and "DEC" buttons at once.
If no programming steps are made for more than 30 seconds, the programming is automatically interrupted
for safety reasons. The transmitter is then in normal operation again. The changes made before the
programming interruption are saved as new memory content.
Summary of Contents for 20 77 60
Page 41: ...41 Bild 3 ...
Page 126: ...126 Figure 3 ...