153
i) Delta wing mixer
For flight models with delta wings, the aileron and elevator controls are achieved by two servos each. For this, a
suitable mixer is installed to mix the aileron and elevator functions in the right proportions. The standard value for the
mixers d1, d2 and d3 is 100, for d4 -100.
To choose this function, first switch on the transmitter. Press the "UP" and
"DN" buttons at once Use the "UP" and "DN" buttons to select mixers V1 to
V4.
With the buttons "INC" or "DEC", you can adjust the values between -100
and 100.
d1 = Mixing proportion of elevator for servo at CH2
d2 = Mixing proportion of aileron for servo at CH2
d3 = Mixing proportion of elevator for servo at CH4
d4 = Mixing proportion of aileron for servo at CH4
For modes 3 or 4, the delta wind mixer must be programmed
for a V-tail model. In this case, the mixer "d1" must be set to a
negative value and "d4" to a positive one.
Figure 38
Summary of Contents for 20 77 60
Page 41: ...41 Bild 3 ...
Page 126: ...126 Figure 3 ...