137
f) Servo setting with dual rate
By switching the switch fig. 1, pos. 13, the aileron, rudder and elevator deflection functions are changed according to
the transmitter programming. These settings do not have any influence on the reaction speed.
The dual rate function may be set at once or separately for the aileron, rudder and elevator functions. The set values
may be chosen between 0 and 120 for normal flight and activated dual rate. The set value applies for both servo
rotational directions and cannot be adjusted separately for each rotational direction.
To choose this function, first switch on the transmitter. Press the "UP" and "DN" buttons at once four times Use the
"UP" and "DN" buttons to select the following servo functions.
dA0 = set value for normal flight servo CH1
dA1 = set value for dual rate for servo CH1
dE0 = set value for normal flight servo CH2
dE1 = set value for dual rate for servo CH2
dr0 = set value for normal flight servo CH4
dr1 = set value for dual rate for servo CH4
With the buttons "INC" or "DEC", you can adjust the values between 0 and 120.
Figure 16
Summary of Contents for 20 77 60
Page 41: ...41 Bild 3 ...
Page 126: ...126 Figure 3 ...