&
User
AN-80i
Manual
70-00072-01-08b
Proprietary Redline Communications © 2009
Page 50 of 128
June 4, 2009
Chapter
4
4
4
P
P
M
M
P
P
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
4.1 Introduction
This section describes only the additional parameters required for configuring PMP
support, and an overview about defining and using VLAN and pass-through groups.
The AN-80i PMP software provides the following main features:
-
IEEE 802.1Q standard compliance
-
VLAN Groups span subscribers
-
Multiple VLAN Connections per subscriber
-
Multiple TLS transport based on VLAN ID classification
-
QoS provisioning with individual CIR setting per connection
-
VLAN trunking with tag insert/delete/re-map
-
VLAN tagged management traffic
4.2 Additional
Information
For additional information, refer to the AN-80i PMP Operation Guide provided on the
CD-ROM, and the Quick Install Guide later in this guide and separately on the CD-ROM.
4.3 PMP
Menu
The following menu items are available for configuring and monitoring the PMP
functions. See Table 8
:
Web - Default System Users on page 45 for the factory default
usernames and passwords. Note that the Browse Groups and all IDs items are available
(
blue text
) only on the sector controller (PMP SC) menu.
Figure 26: Web - Sector Controller (left) and Subscriber (right) PMP Menu
