&
User
AN-80i
Manual
70-00072-01-08b
Proprietary Redline Communications © 2009
Page 81 of 128
June 4, 2009
Table 21: CLI - get
PTP PMP Parameter/Description
werxpkt
: Wireless Eth Rx packets counter.
werxpktdis
: Wireless Eth Rx discarded packets counter.
werxpkterr
: Wireless Eth Rx packets with errors counter.
wetxpkt
: Wireless Eth Tx packets counter.
wetxpktdis
: Wireless Eth Tx discarded packets counter.
wetxpkterr
: Wireless Eth Tx packets with errors counter.
5.2.9 Load
Use the
load
command to load information to the AN-80i.
Table 22: CLI - load
PTP PMP Parameter/Description
√
Load saved security information from an FTP server. The <file> will be
saved in flash RAM area in the format <prefix>.pem (e.g.,
dsa_key.pem).
load file <server> <name> <mode> <script>
server
IP address of the TFTP server. Files must be located in
the TFTP server default download directory.
name <file name>
File name on server must be one of the following:
dsa_key_<mac>.pem DSA key used for SSH.
rsa_key_<mac>.pem RSA Key used for SSH.
ssl_cert_<mac>.pem SSL Certificate.
ssl_key_<mac>.pem SSL Key.
usr_wcert_<mac>.der User wireless certificate.
usr_wkey_<mac>.der User wireless key.
usr_wacert_<mac>.der
User wireless authority
certificate.
where,
<mac> is the MAC address of the unit.
For example: dsa_key_00-09-02-00-01-02.pem
mode
Specify the type of information to display.
run
- Display keys currently in-use.
usr
- Display the user keys and certificates (default)
script <server> <name>
Use
the
script
command to load the AN-80i configuration
information from a file (created using script command) from a
remote TFTP server. The file must be located in the TFTP
default directory.
server
Server IP address
name
Script file name
