&
User
AN-80i
Manual
70-00072-01-08b
Proprietary Redline Communications © 2009
Page 33 of 128
June 4, 2009
3.6.2 SNMP Settings Screen
Click
Configure SNMP
(blue text) on the System Configuration screen to view and edit
the SNMP settings. The hyperlink appears only if the SNMP Enable box is checked.
The SNMP protocol allows an application to interrogate the AN-80i for information saved
in the MIB an to change enabled fields within the MIB. When the SNMP Agent in the AN-
80i detects an error condition, a special message known as a trap can be sent (if
enabled). A Trap Host is an IP system/server that is set up to receive SNMP trap
messages. The SNMP Configuration screen displays a list of the current communities.
The Chg buttons can be used to add, edit, or delete community settings.
SNMP Community Settings
The upper portion of the screen displays the SNMP community settings.
Figure 14: Web - SNMP Communities Management Screen
SNMP Communities Management
Community Name
: Displays the SNMP community name for each entry (maximum of
eight entries).
Access
: Displays the access permissions for each SNMP community.
Blank
: Deny read and write permission for this community.
R
: Grant read access permission only for this community. Deny write permission.
W
: Grant write access permission only for this community. Deny read permission.
RW
: Grant read and write access permission for this community.
Chg
: Click the Chg button to modify the settings for the adjacent entry.
Each entry in the SNMP Community Management table may be changed individually.
Click the Chg button adjacent to any entry to modify the settings.
