Redline Communications RedCONNEX AN-80i User Manual Download

Page: 77 / 128

User

AN-80i

Manual

70-00072-01-08b

Page 77 of 128

June 4, 2009

5.2.3 Clear

Use the

clear

command to delete all entries in a table.

Table 16: CLI - clear

PTP PMP Parameter/Description

√

Enter this command to delete all IDs from an ID table.

clear <idtable>

idtable

- Clear all the IDs

√

Enter this command to delete all IDs from an ID table.

clear <arptable> <freqlist> <log>

arptable

- Delete all static entries in the ARP table (see arp).

freqlist

- Clear all the frequency list (see 'freq' command)

log

- Clear all messages from the log

5.2.4 Del

Use the

del

command to delete a specific ID or security key/certificate.

Table 17: CLI - del

PTP PMP Parameter/Description

√

del <id>

Remove a group, connection, or link id.

id number

<integer>

Unique number for group, connection, or link.

√

del <file>

file <name> <mode>

Remove a file from flash and runtime memory.

<name>

File name on server. File name must be one of the

following:
dsa_key_<mac>.pem

DSA key used for SSH.

rsa_key_<mac>.pem

RSA Key used for SSH.

ssl_cert_<mac>.pem SSL

Certificate.

ssl_key_<mac>.pem SSL

Key.

usr_wcert_<mac>.der*

User wireless certificate.

usr_wkey_<mac>.der*

User wireless key.

usr_wacert_<mac>.der* User wireless authority
certificate
The <mac> portion is the MAC address of the board.
For example: dsa_key_00-09-02-00-01-02.pem

<mode>

Can be 'usr' or 'factory'. Defaults to 'usr' if mode is not

specified.

*Not used in v3.00 software release.

Summary of Contents for RedCONNEX AN-80i

































































































































Search results

Summary of Contents for RedCONNEX AN-80i

Reviews:

Related manuals for RedCONNEX AN-80i

Brands by name

Popular brands

Redline Communications RedCONNEX AN-80i, User Manual

Search results

Summary of Contents for RedCONNEX AN-80i

Reviews:

Related manuals for RedCONNEX AN-80i

Brands by name

Popular brands