&
User
AN-80i
Manual
70-00072-01-08b
Proprietary Redline Communications © 2009
Page 55 of 128
June 4, 2009
4.6 PMP
Screens
This section describes the screens used to configure and monitor PMP deployments.
4.6.1 Dashboard
Display
The dashboard display at the top of all screens shows summary of important operational
information including: the unit IP address, operating frequency, current time (web user's
platform), wireless status, Ethernet status, and the radio temperature.
Figure 29: Web - PMP - Dashboard Display
IP
Address
: Current IP address setting of this unit.
Wireless
Frequency
: Current RF channel frequency.
Time
: Time obtained from user's Web browser.
Radio Temperature
: Internal temperature of the radio.
Wireless
Wireless Link Link LED
The wireless Link LED lights solid green under the following conditions:
Sector Controller: Wireless link is established to one or more subscribers.
Subscriber:
Wireless link is established to the sector controller.
If the LED is off, it may indicate one of the issues listed in the following table:
Wireless Signal LED
The wireless Signal LED has the same function as the wireless Link LED.
Ethernet
Ethernet Link LED
The Ethernet Link LED lights solid green when there is an Ethernet connection and no
traffic, and blinks when traffic is detected. If the LED is off, it may indicate one of the
issues listed in the following table:
Ethernet 100 LED
The Ethernet 100 LED lights solid green when the Ethernet port is operating at 100 Mb/s
and the LED is off when operating at 10 Mb/s. If the LED is off, it may indicate one of the
issues listed in the following table:
Ethernet FD LED
The FD LED lights solid green when the Ethernet connection is operating in full duplex
mode and blinks when collisions are detected on the Ethernet port. If the LED is blinking,
it may indicate one of the issues listed in the following table:
