Redline Communications RedCONNEX AN-80i User Manual Download Page 44

Page: 44 / 128

User

AN-80i

Manual

70-00072-01-08b

Page 44 of 128

June 4, 2009

Group

: Select the group to be associated with this username (optional).

New Password

: Enter the new user password for this account (optional).

Confirm Password

: Re-enter new user password (if changing user password).

Admin User

: Enter the name of the administrator authorizing this change.

Admin Password

: Enter the administrator password.

Change

: Click the Change button to make these changes effective.

Add User

Use this dialog to create a new account.

Name

: Enter a name for the new user account. Usernames may be up to 15 alpha-

numeric characters including a-z, A-Z, 0-9, dash (-), and underscore (_).

Group

: Select a group for the new user account. See Table 7

Web - Screens and User

Access table.

New Password

: Enter a password for the new account. Passwords may be up to 15

alpha-numeric characters including a-z, A-Z, 0-9, dash (-), and underscore (_).

Confirm Password

: Re-enter the password for the new account.

Admin User

: Enter the name of the administrator authorizing this change.

Admin Password

: Enter the administrator password.

Add

: Click the Add button to create the new account.

Delete User

Use this dialog to delete an existing user.

User name

: Select an existing user account.

Admin User

: Enter the name of the administrator authorizing this change.

Admin Password

: Enter the administrator password.

Del

: Click the Del button to make these changes effective.

Group Permissions

The following table lists the permissions associated with each group.

Table 7

Web - Screens and User Access

PTP PMP

PMP

Screen Admin

Access

User

Access

Description

√

General Information

View general system

identification and configuration
settings.

√

System Status

View system, Ethernet, and

wireless statistics.

√

System Log

View the system status

messages.

√

Configure System

View and adjust configuration

system, IP address,
management, and wireless
settings.

√

Upload Software

Upload a new software binary

file.

√

Users Management

X
X

Change your login password.
Add and delete users.

Summary of Contents for RedCONNEX AN-80i

































































































































Search results

Summary of Contents for RedCONNEX AN-80i

Reviews:

Related manuals for RedCONNEX AN-80i

Brands by name

Popular brands

Redline Communications RedCONNEX AN-80i, User Manual

Search results

Summary of Contents for RedCONNEX AN-80i

Reviews:

Related manuals for RedCONNEX AN-80i

Brands by name

Popular brands