39
a
a
25 mm
b
b
j
k
6 - INSTALLATION AND ASSEMBLY OF BOILER
Technical Dept. - All rights reserved - Reproduction is prohibited
•
Calibrate the actuator.
Set up the limit switch before inserting the actuator on the pin of the boiler
1. Press the clutch key and turn the vise anti-clockwise to the end of the scale.
2. Slacken the screw "
a
" and turn the piece anti-clockwise as shown in the drawing until the limit switch is 25 mm above the actuator
and then re-close the screw.
3. Slacken also the two bolts "
b
" to facilitate subsequent insertion of the pin of the boiler.
•
Turn the pin protruding from the boiler using a hand or adjustable pliers.
•
Insert the actuator as far as possible on the bracket "
k
" taking care with insertion on insert "
j
".
Summary of Contents for LOGIKA 25-35 REFILL
Page 52: ...50 y x S v 7 INSTALLATION AND ASSEMBLY OFTANK ASSEMBLYOFSIDEPANEL MANUALTANK ...
Page 121: ......
Page 122: ......
Page 123: ......
