RED LOGIKA 25-35 REFILL, Installation Manual

Page: 93 / 124

11
2 - MENU OPTIONS
Technical Dept. - All rights reserved - Reproduction is prohibited
NOTES ON USE OF THE TIMER
• The start time can be between 00:00 and 23:50
• If the stop time has not yet been saved, the program proposes a start time at +10 minutes.
• If a timer program stops the boiler at 24:00 on one day and another program starts it up at 00:00 on the next day: the boiler remains
ON.
• If a program proposes start-up and/or shut-down at times in another timer program: if the boiler is already on, the start has no effect
while OFF turns off the boiler.
• When the boiler is on and the timer is active, pressing the OFF key turns off the boiler; the boiler then restarts automatically at the
next time of the timer.
• When the boiler is off and the timer is active, pressing the ON key turns on the boiler; the boiler then stops automatically at the next
time of the timer.
EXAMPLES OF PROGRAMMING
P1 P2
on off day on off day
08:00 12:00 Monday 11:00 14:00 Monday
Boiler on between 08:00 and 14:00
P1 P2
on off day on off day
08:00 11:00 Monday 11:00 14:00 Monday
Boiler on between 08:00 and 14:00
P1 P2
on off day on off day
17:00 24:00 Monday 00:00 06:00 Tuesday
Boiler on between 17:00 on Monday to 06:00 on Tuesday
SETTINGS MENU
The SETTINGS menu is for configuring use of the boiler:
a. Language.
b. Cleaning (shown only when boiler is off).
c. Auger loading (shown only when boiler is off).
d. Auto Eco.
e. Eco off T
f. Pump on T
g. Pellet recipe.
h. Max power
i. Component test (shown only when boiler is off).
j. Lambda test (shown only when boiler is off).
k. "Chimney sweeper" function (can be enabled only when boiler is on, for checking emissions in field).
l. System configuration (factory settings: system 02).
m. Season
n. Solar (on/off for configurations 4-6).
o. Technical menu.
NOTE: Some of the options listed above cannot be enabled in certain "system configurations".