RED LOGIKA 25-35 REFILL, Installation Manual

Page: 94 / 124

12
2 - MENU OPTIONS
a - Language
Select the language as follows:
• Press the "menu" key.
• Use the arrow keys to scroll through and select "Settings"
• Press “menu” to confirm.
• Use the arrow keys to scroll through and select "language".
• Press “menu” to confirm.
• Use the + - keys to select the required language (IT/EN/DE/FR/ES/NL/PL/DA)
• Press "menu" to confirm and "esc" to exit.
b - Cleaning
This function can be enabled only when the stove is off. When enabled, the following operations are carried out automatically:
- Brazier rotation (removal of residual ash)
- Turbolator activation (when applicable)
- Smoke Fan Activation (intake of ash removed with turbolators)
- Activation of ash drawer motors (when applicable)
The 180" countdown is shown on the display during these steps and it is not possible to do any other operations at the same time (the
countdown cannot be stopped). A sound signals the end of the countdown.
Select "Cleaning" (only with boiler off) as follows:
• Press key 3 "menu".
• Use the 1-2 arrow keys to scroll through and select ''Settings''
• Press 3 “menu” to confirm.
• Use the 1-2 arrow keys to scroll through and select "Cleaning".
• Press 3 “menu” to confirm.
• Use keys 4 (+) and 5 (-) to select "On".
• Press 3 ''menu'' to confirm and 6 ''esc'' to exit.
Refer to chapter 11 "Cleaning and Maintenance".
c - Load auger
This is for filling the the pellet loading system. This can be enabled only when the boiler is off. A countdown appears. The auger stops
automatically at the end of the countdown and the menu closes.
Select ''Load auger'' (only with boiler off) as follows:
• Press key 3 ''menu''.
• Use the 1-2 arrow keys to scroll through and select ''Settings''
• Press 3 “menu” to confirm.
• Use the 1-2 arrow keys to scroll through and select ''Load auger''.
• Press 3 “menu” to confirm.
• Use keys 4 (+) and 5 (-) to select ''Enable''.
• Press 3 ''menu'' to confirm and 6 ''esc'' to exit.
Note: There is a delay between activation and start-up of the auger during which time the fire damper opens.