Operation in Receiver Mode
R&S FSH
1145.5973.12 2.22
E-14
Direct entry of a channel table:
If the channel display is active (CHANNEL MODE softkey active in the FREQ menu), press the
CHANNEL TABLE softkey.
Press the SELECT USER TAB softkey.
The R&S FSH will use the last channel table that was entered directly.
Press the DEFINE USER TAB softkey.
The R&S FSH will open the submenu for defining the
channel table.
Press the DEFINE USER TAB softkey again.
Enter the number of the first channel and confirm with the ENTER key.
Press the DEFINE USER TAB softkey.
Using the rotary knob or the cursor keys, select 1ST CHANNEL FREQ... from the menu and confirm
with the ENTER key.
Enter the frequency for the first channel number.
Press the DEFINE USER TAB softkey.
Using the rotary knob or the cursor keys, select NO OF CHANNELS... from the menu and confirm
with the ENTER key.
Enter the number of channels and confirm with the ENTER key.
Press the DEFINE USER TAB softkey.
Using the rotary knob or the cursor keys, select CHANNEL SPACING... from the menu and confirm
with the ENTER key.
Enter the frequency spacing for the channels and confirm with the ENTER key.
Press the EXIT key to exit the menu for defining channel tables.
The R&S FSH will now show channel numbers rather than the frequency. It also shows the associated
frequency above Channel.
Selecting the reference level:
The reference level is the maximum level of the analog bar-graph display. It must be set such that the
level display is located within the bar-graph scale.
Press the REF LEVEL softkey in the main menu of the receiver mode (MEAS key). Or press the
AMPT key.
Using the rotary knob or cursor keys, change the reference level or, using the numeric keys, enter a
new reference level.
Confirm with the ENTER key.
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391
Fax:0755-83539691
Website: www.Sengt.com