Two-port measurements with the tracking generator
R&S FSH
1145.5973.12 4.98
E-14
Setting for detecting the R&S FSH-Z3 in the transmission and spectrum
measurement
Operation:
Press the SETUP key.
Select the HARDWARE SETUP softkey.
Select ACCESSORY from the menu by using the
rotary knob or the cursor keys and confirm the entry
with the ENTER key.
The R&S FSH opens a menu where different modes
for detecting the R&S FSH-Z3 bridge can be selected.
Select AUTO DETECT or BRIDGE FSH-Z3 from the
menu by using the rotary knob or the cursor keys
and confirm the entry with the HARDWARE SETUP
softkey or the ENTER key.
If you select AUTO DETECT, the VSWR bridge is
detected automatically as soon as the control cable
has been connected to the probe power socket on the
R&S FSH.
If you select BRIDGE FSH-Z3, the VSWR bridge is
detected by default. This setting may be useful if you
only work with the R&S FSH-Z3 connected and do not
want to waste time on automatic detection.
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391
Fax:0755-83539691
Website: www.Sengt.com
