Connecting Printers
R&S FSH
1145.5973.12 1.20
E-14
Note:
The R&S FSH-Z22 is designed for a data transmission rate of max. 38 400 baud (= default
setting). Therefore, set the baud rate (PRINTER BAUD RATE) in the SETUP menu to
38 400 baud. The baud rates 9600 baud and 19 200 baud can also be set on the
R&S FSH-Z22 by opening its housing.
Selecting a printer
Press the SETUP key on the R&S FSH.
The R&S FSH displays the selected printer and its
baud rate in the setup settings.
To select another printer, proceed as follows:
Press the GENERAL softkey.
Using the rotary knob or cursor keys, select
PRINTER TYPE... from the menu and confirm with
the ENTER key or by pressing the GENERAL
softkey again.
Using the rotary knob or cursor keys, select the
printer you want and confirm with the ENTER key or
by pressing the GENERAL softkey again.
The R&S FSH displays the selected printer under
"Printer Type".
Next, set the baud rate for the selected printer.
Press the GENERAL softkey.
Using the rotary knob or cursor keys, select
PRINTER BAUD... from the menu and confirm with
the ENTER key.
The selection box for the available baud rates
(1200 baud to 115 200 baud) opens.
Using the rotary knob or cursor keys, select the
baud rate you want and confirm with the ENTER key
or by pressing the GENERAL softkey a second time.
The R&S FSH displays the selected baud rate under
"RS232 Baudrate" in the setup display.
Note:
If the serial/parallel converter (R&S FSH-Z22) is used to control a printer with a parallel
interface, set the RS-232-C interface to 38 400 baud.
The contents of the setup display can be output to the printer by pressing the SETUP -> PRINTER
softkey.
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391
Fax:0755-83539691
Website: www.Sengt.com
