Field-Strength Measurement with Isotropic Antenna
R&S FSH
1145.5973.12 4.144
E-14
Renaming the USER standards:
You can assign a user-defined name for the USER standard. This makes the standard being used by
the R&S FSH immediately clear. The name entered for the USER standard will also appear on the
screen, enabling you to document the setting when you document the measurement, for example.
Press the STANDARD softkey.
The R&S FSH will open the table with the available
standards.
Select Rename USER with the rotary knob or the
cursor keys.
Confirm the selection with the ENTER key or the
STANDARD softkey.
The R&S FSH will open the window for entering the
name of the USER standard.
Enter a name of your choice by using the numeric
keys.
Confirm the entry with the ENTER key.
When you call the STANDARD menu, the name you
entered will appear under USER, e.g. DAB (USER).
The name will also appear in the upper right-hand
corner of the screen after you select the USER
standard.
You can also create additional standards by using the
R&S FSH View control software and load them into the
R&S FSH. You can also use this software to delete
factory-supplied standards if you do not need them.
The R&S FSH will then offer only the standards you
need, e.g. for measuring TV signals.
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391
Fax:0755-83539691
Website: www.Sengt.com
