manualshive.com logo in svg

RAM Commercial PROMASTER 2020, Owner'S Manual

The RAM Commercial PROMASTER 2020 is a versatile and reliable work vehicle built for efficiency. For a convenient and easy-to-use guide on operating this exceptional model, our Quick Reference Manual is available for free download from our website. Access your user manual today and maximize the potential of your PROMASTER 2020.

Share
Download
background image

48

GETTING TO KNOW YOUR INSTRUMENT PANEL

 

WARNING LIGHTS AND MESSAGES

The warning/indicator lights will illuminate in 

the instrument panel together with a dedicated 

message and/or acoustic signal when 

applicable. These indications are indicative and 

precautionary and as such must not be 

considered as exhaustive and/or alternative to 

the information contained in the Owner’s 

Manual, which you are advised to read carefully 

in all cases. Always refer to the information in 

this chapter in the event of a failure indication. 

All active telltales will display first if applicable. 

The system check menu may appear different 

based upon equipment options and current 

vehicle status. Some telltales are optional and 

may not appear.

Red Warning Lights

Seat Belt Reminder Warning Light

When the ignition is first placed in the 

ON/RUN or MAR/ON/RUN position, if 

the driver’s seat belt is unbuckled, a 

chime will sound and the light will turn 

on. When driving, if the driver or front passenger 

seat belt remains unbuckled, the Seat Belt 

Reminder Light will flash or remain on 

continuously and a chime will sound. Refer to 

“Occupant Restraints Systems” in “Safety” for 

further information.

Air Bag Warning Light 

This light will turn on for four to eight 

seconds as a bulb check when the 

ignition is placed in the ON/RUN or 

MAR/ON/RUN position. If the light is 

either not on during startup, stays on, or turns 

on while driving, have the system inspected at 

an authorized dealer as soon as possible. This 

light will illuminate with a single chime when a 

fault with the Air Bag Warning Light has been 

detected, it will stay on until the fault is cleared. 

If the light comes on intermittently or remains 

on while driving, have an authorized dealer 

service the vehicle immediately.

Battery Charge Warning Light 

This warning light will illuminate when 

the battery is not charging properly. If 

it stays on while the engine is running, 

there may be a malfunction with the 

charging system. Contact an authorized dealer 

as soon as possible.
This indicates a possible problem with the 

electrical system or a related component.

Door Open Warning Light  

This indicator will illuminate when one 

or more door(s) are not fully closed.

NOTE:

If the vehicle is moving and a door is opened, 

there will also be a single chime.

Electronic Throttle Control (ETC) Warning 

Light 

This warning light will illuminate to 

inform of a problem with the 

Electronic Throttle Control (ETC) 

system. If a problem is detected while 

the vehicle is running, the light will either stay 

on or flash depending on the nature of the 

problem. Cycle the ignition when the vehicle is 

safely and completely stopped and the 

transmission is placed in the PARK (P) position. 

The light should turn off. If the light remains on 

with the vehicle running, your vehicle will 

usually be drivable; however, see an authorized 

dealer for service as soon as possible.
If the light continues to flash when the vehicle is 

running, immediate service is required and you 

may experience reduced performance, an 

elevated/rough idle, or engine stall and your 

vehicle may require towing. The light will come 

20_VF_OM_EN_USC_t.book  Page 48  

Summary of Contents for PROMASTER 2020





































































































































































































































































Reviews:

No comments

Related manuals for PROMASTER 2020

Baja Designs S8 Instructions Manual preview
S8
Brand: Baja Designs Pages: 6
EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
Jeep PATRIOT 2013 Specifications preview
PATRIOT 2013
Brand: Jeep Pages: 5
Jeep PATRIOT 2012 Specifications preview
PATRIOT 2012
Brand: Jeep Pages: 6
Jeep Grand Cherokee SRT 2014 Operating Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 345
Jeep Grand Cherokee 2015 User Manual preview
Grand Cherokee 2015
Brand: Jeep Pages: 236
Jeep Grand Cherokee Quick Manual To Repairs preview
Grand Cherokee
Brand: Jeep Pages: 18
Jeep Grand Cherokee Quick Reference Manual preview
Grand Cherokee
Brand: Jeep Pages: 24
Jeep Compass 2015 Owner'S Manual preview
Compass 2015
Brand: Jeep Pages: 560
Jeep Compass 2013 Owner'S Manual preview
Compass 2013
Brand: Jeep Pages: 525
Jeep Cherokee 2019 User Manual preview
Cherokee 2019
Brand: Jeep Pages: 308
Jeep CHEROKEE 2017 Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 86
Jeep CHEROKEE 2017 Owner'S Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 638
Jeep 2022 CHEROKEE Quick Start Manual preview
2022 CHEROKEE
Brand: Jeep Pages: 9
Jeep 2014 Patriot Service Information preview
2014 Patriot
Brand: Jeep Pages: 51
Jeep Jeep Wrangler Buyer'S Manual preview
Jeep Wrangler
Brand: Jeep Pages: 4
Jeep Jeep Wrangler Owner'S Manual Supplement preview
Jeep Wrangler
Brand: Jeep Pages: 50
Jeep Grand Cherokee SRT 2014 Owner'S Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 118

Brands by name

Popular brands

Load more brands