manualshive.com logo in svg

RAM Commercial PROMASTER 2020, Owner'S Manual

The RAM Commercial PROMASTER 2020 is a versatile and reliable work vehicle built for efficiency. For a convenient and easy-to-use guide on operating this exceptional model, our Quick Reference Manual is available for free download from our website. Access your user manual today and maximize the potential of your PROMASTER 2020.

Share
Download
background image

104

STARTING AND OPERATING

 

unavailable, without reference to the sensor in 

failure condition. If even a single sensor fails, 

the entire system must be disabled. The system 

is turned off automatically.

Cleaning The ParkSense System

Clean the Rear Park Assist sensors with water, 

car wash soap and a soft cloth. Do not use 

rough or hard cloths. In washing stations, clean 

sensors quickly keeping the vapor jet/high 

pressure washing nozzles at least 4 inches (10 

cm) from the sensors. Do not scratch or poke 

the sensors. Otherwise, you could damage the 

sensors.

ParkSense Rear Park Assist System Usage 

Precautions

NOTE:

Ensure that the outer surface and the under

-

side of the rear bumper is clean and clear of 

snow, ice, mud, dirt or other obstruction to 

keep the Rear Park Assist system operating 

properly.

Jackhammers, large trucks, and other vibra

-

tions could affect the performance of Rear 

Park Assist.

Clean the Rear Park Assist sensors regularly, 

taking care not to scratch or damage them. 

The sensors must not be covered with ice, 

snow, slush, mud, dirt or debris. Failure to do 

so can result in the system not working prop

-

erly. The Rear Park Assist system might not 

detect an obstacle behind the fascia/

bumper, or it could provide a false indication 

that an obstacle is behind the fascia/

bumper.

Objects such as bicycle carriers, etc., must 

not be placed within 12 inches (30 cm) from 

the rear fascia/bumper while driving the 

vehicle. Failure to do so can result in the 

system misinterpreting a close object as a 

sensor problem, causing a failure indication 

to be displayed in the instrument cluster 

display.

WARNING!

Drivers must be careful when backing up 

even when using ParkSense. Always check 

carefully behind your vehicle, look behind 

you, and be sure to check for pedestrians, 

animals, other vehicles, obstructions, and 

blind spots before backing up. You are 

responsible for safety and must continue to 

pay attention to your surroundings. Failure 

to do so can result in serious injury or 

death.

Before using ParkSense, it is strongly 

recommended that the ball mount and 

hitch ball assembly is disconnected from 

the vehicle when the vehicle is not used for 

towing. Failure to do so can result in injury 

or damage to vehicles or obstacles 

because the hitch ball will be much closer 

to the obstacle than the rear fascia when 

the loudspeaker sounds the continuous 

tone. Also, the sensors could detect the ball 

mount and hitch ball assembly, depending 

on its size and shape, giving a false indica

-

tion that an obstacle is behind the vehicle.

20_VF_OM_EN_USC_t.book  Page 104  

Summary of Contents for PROMASTER 2020





































































































































































































































































Reviews:

No comments

Related manuals for PROMASTER 2020

Camcar 40052 Mounting Instructions preview
40052
Brand: Camcar Pages: 6
Camcar 40000 Manual preview
40000
Brand: Camcar Pages: 6
Daihatsu S85 Wiring Diagrams preview
S85
Brand: Daihatsu Pages: 41
Daihatsu S85 Workshop Manual preview
S85
Brand: Daihatsu Pages: 268
Oldsmobile 2004 Alero Owner'S Manual preview
2004 Alero
Brand: Oldsmobile Pages: 360
Vauxhall Ampera Owner'S Manual preview
Ampera
Brand: Vauxhall Pages: 199
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
Huf HUF8432MS Technical Description And User Manual preview
HUF8432MS
Brand: Huf Pages: 6
TATA Motors Harrier 2021 Owner'S Manual preview
Harrier 2021
Brand: TATA Motors Pages: 308
MBRP 0130717 Assembly preview
0130717
Brand: MBRP Pages: 5
Butts of Bawtry TBT4700 Quick Start Manual preview
TBT4700
Brand: Butts of Bawtry Pages: 2
Belkin LineCast Auto FM User Manual preview
LineCast Auto FM
Brand: Belkin Pages: 15
Rover 75 Saloon Owner'S Handbook Manual preview
75 Saloon
Brand: Rover Pages: 285
Xpresskit 20110601 Installation Manual preview
20110601
Brand: Xpresskit Pages: 12
BrandMotion 212IFD001N User Manual preview
212IFD001N
Brand: BrandMotion Pages: 12
Whelen Engineering Company 12H4S140 Installation Manual preview
12H4S140
Brand: Whelen Engineering Company Pages: 4
PEUGEOT 5008 2017 Handbook preview
5008 2017
Brand: PEUGEOT Pages: 404

Brands by name

Popular brands

Load more brands