RAM Commercial PROMASTER 2020 Owner'S Manual Download Page 220

Page: 220 / 260

218

MULTIMEDIA

Answering An Incoming Call

Call Controls
The buttons on the display allow the following

phone call functions to be managed:



Answer



End



Ignore



Put on hold/resume



Deactivate/activate the microphone



Transfer the call



Switch from one call to the other



Conference/merge two active calls

Answering Or Ignoring A Call With No Call

Currently In Progress
When an incoming call rings or is announced on

Uconnect, push the Answer button on the

touchscreen or push the PHONE button on the

steering wheel.
Answering Or Ignoring An Incoming Call With A

Call Currently In Progress
When an incoming call rings or is announced on

Uconnect, push the Answer button on the

touchscreen or push the PHONE button on the

steering wheel to answer the call and put the

ongoing call on hold.

NOTE:

Not all mobile phones may support the manage

ment of an incoming call when another phone

conversation is active.

Ending A Call

Press the End button on the touchscreen or the

PHONE button on the steering wheel controls to

end a call in progress.
Only the ongoing call is ended and any call on

hold becomes the new active call.
Depending on the type of mobile phone, if the

ongoing call is ended by the caller, the call on

hold may not be activated automatically.

Uconnect Phone Features

Mute/Unmute

1. During a call, push the Voice Recognition

(VR) button on the steering wheel.

2. After the BEEP, say “mute” (or “mute off”).

Reading Messages
The system can read the messages received by

the mobile phone.
To use this function the mobile phone must

support the SMS exchange function via

Bluetooth®.
If this function is not supported by the phone,

the corresponding message button is

deactivated (grayed out) or may only accept

incoming messages.
When a text message is received, the display

will show a screen where the options "Listen",

"Call" or "Ignore" can be selected.
Press the message button to access the list of

SMS messages received by the mobile phone

(the list displays a maximum of 60 messages

received).
SMS Message Reader Activation/Deactivation
The SMS message automatic reading function

can be activated/deactivated by pressing the

corresponding button on the display, which is

shown after pressing the phone selection

button.

NOTE:

On some mobile phones, to make the SMS

voice reading function available, the SMS notifi

20_VF_OM_EN_USC_t.book Page 218

Summary of Contents for PROMASTER 2020





































































































































































































































































Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands

RAM Commercial PROMASTER 2020, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands