manualshive.com logo in svg

RAM Commercial PROMASTER 2020, Owner'S Manual

The RAM Commercial PROMASTER 2020 is a versatile and reliable work vehicle built for efficiency. For a convenient and easy-to-use guide on operating this exceptional model, our Quick Reference Manual is available for free download from our website. Access your user manual today and maximize the potential of your PROMASTER 2020.

Share
Download
background image

86

SAFETY

 

Front Bench Seat Automatic Locking Retractor (ALR) 

Locations

Installing A Child Restraint With A Switchable 

Automatic Locking Retractor (ALR) 

Child restraint systems are designed to be 

secured in vehicle seats by lap belts or the lap 

belt portion of a lap/shoulder belt.

1. Place the child seat in the center of the 

seating position.

2. Pull enough of the seat belt webbing from 

the retractor to pass it through the belt path 

of the child restraint. Do not twist the belt 

webbing in the belt path.

3. Slide the latch plate into the buckle until you 

hear a “click.”

4. Pull on the webbing to make the lap portion 

tight against the child seat.

5. To lock the seat belt, pull down on the 

shoulder part of the belt until you have 

pulled all the seat belt webbing out of the 

retractor. Then, allow the webbing to retract 

back into the retractor. As the webbing 

retracts, you will hear a clicking sound. This 

means the seat belt is now in the Automatic 

Locking mode.

6. Try to pull the webbing out of the retractor. 

If it is locked, you should not be able to pull 

out any webbing. If the retractor is not 

locked, repeat step 5.

7. Finally, pull up on any excess webbing to 

tighten the lap portion around the child 

restraint while you push the child restraint 

rearward and downward into the vehicle 

seat.

8. Test that the child restraint is installed 

tightly by pulling back and forth on the child 

seat at the belt path. It should not move 

more than 1 inch (25.4 mm) in any 

direction.

Any seat belt system will loosen with time, so 

check the belt occasionally, and pull it tight if 

necessary.

ALR — Switchable Automatic Locking Retractor

WARNING!

Improper installation or failure to properly 

secure a child restraint can lead to failure 

of the restraint. The child could be badly 

injured or killed.

Follow the child restraint manufacturer’s 

directions exactly when installing an infant 

or child restraint.

20_VF_OM_EN_USC_t.book  Page 86  

Summary of Contents for PROMASTER 2020





































































































































































































































































Reviews:

No comments

Related manuals for PROMASTER 2020

iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
ULTIMATE SPEED CARBON Assembly And Safety Advice preview
CARBON
Brand: ULTIMATE SPEED Pages: 19
Ecco EW4010 Installation And Operation Instructions Manual preview
EW4010
Brand: Ecco Pages: 9
Ecco EW4009 Installation And Operation Instructions Manual preview
EW4009
Brand: Ecco Pages: 9
TATA Motors Indigo Owner'S Manual & Service Book preview
Indigo
Brand: TATA Motors Pages: 164
Jabra TOUR Get Started preview
TOUR
Brand: Jabra Pages: 10
OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
Uniden BTSC1500 Owner'S Manual preview
BTSC1500
Brand: Uniden Pages: 16
Uniden BTSC1500 User Manual preview
BTSC1500
Brand: Uniden Pages: 20
Front Runner Easy-Out Fitting Instructions preview
Easy-Out
Brand: Front Runner Pages: 5
Carcomm CNM-71 Quick Start Manual preview
CNM-71
Brand: Carcomm Pages: 2
Whispbar K392W Fitting Instructions For Basic Carrier preview
K392W
Brand: Whispbar Pages: 14
Quadratec 12057.0261 Installation Manual preview
12057.0261
Brand: Quadratec Pages: 12
Whispbar K919W Fitting Instructions Manual preview
K919W
Brand: Whispbar Pages: 17
Atera 080 705 User Information preview
080 705
Brand: Atera Pages: 3
Black Horse RB001BK Installation Instructions preview
RB001BK
Brand: Black Horse Pages: 5
ULTIMATE SPEED 91449 Operation And Safety Notes preview
91449
Brand: ULTIMATE SPEED Pages: 34
TomTom LINK 105 Installation Manual preview
LINK 105
Brand: TomTom Pages: 22

Brands by name

Popular brands

Load more brands