RAM Commercial PROMASTER 2020 Owner'S Manual Download Page 211

Page: 211 / 260

MULTIMEDIA

209

Radio Mode

Operating Radio Mode

Uconnect 3/3 NAV With 5-inch Display Radio

The radio is equipped with the following modes:



AM (SW/LW/MW) – If Equipped



SiriusXM® Radio – If Equipped

Push the RADIO button on the faceplate, to

enter the Radio Mode. The different tuner

modes; FM/AM/SXM (if equipped), can then be

selected by pressing the corresponding buttons

on the touchscreen in the Radio mode.

Switching The System ON/OFF

The screen will switch on/off when the ON/

Volume button is pushed.

Volume/Power

Rotate the VOLUME rotary knob to adjust the

Volume. When the audio system is turned on,

the sound will be set at the same volume level

as last played.
Push the POWER button to turn the system on

or off.

Enter/Browse And Tune/Scroll Control

Turn the rotary TUNE/SCROLL control knob

clockwise to increase or counterclockwise to

decrease the radio station frequency.

Seek Functions

Seek Up
Press and release the Seek Up button on the

touchscreen to tune the radio to the next

listenable station or channel.
During a Seek Up function, if the radio reaches

the starting station after passing through the

entire band two times, the radio will stop at the

station where it began.
Fast Seek Up
Press and hold the Seek Up button on the

touchscreen to advance the radio through the

available stations or channels at a faster rate.

The radio stops at the next available station or

channel when the button on the touchscreen is

released.
Seek Down
Press and release the Seek Down button on

the touchscreen to tune the radio to the next

listenable station or channel.

1 — Radio Station Presets
2 — Show All Presets
3 — Seek Up
4 — Audio Settings
5 — Station Info
6 — Direct Tune
7 — Radio Band
8 — Seek Down

20_VF_OM_EN_USC_t.book Page 209

Summary of Contents for PROMASTER 2020





































































































































































































































































Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands

RAM Commercial PROMASTER 2020, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands