RAM Commercial PROMASTER 2020 Owner'S Manual Download Page 192

Page: 192 / 260

190

TECHNICAL SPECIFICATIONS

Wheel Mounting Surface

Tighten the lug nuts/bolts in a star pattern until

each nut/bolt has been tightened twice. Ensure

that the socket is fully engaged on the lug nut/

bolt (do not insert it halfway).

Torque Patterns

After 25 miles (40 km), check the lug nut/bolt

torque to be sure that all the lug nuts/bolts are

properly seated against the wheel.

FUEL REQUIREMENTS

3.6L Engine

This engine is designed to meet all

emissions regulations and provide

optimum fuel economy and

performance when using high quality

unleaded “Regular” gasoline having a posted

octane number of 87 as specified by the (R+M)/

2 method. The use of higher octane “Premium”

gasoline is not required, as it will not provide

any benefit over “Regular” gasoline in these

engines.
While operating on gasoline with an octane

number of 87, hearing a light knocking sound

from the engine is not a cause for concern.

However, if the engine is heard making a heavy

knocking sound, see your dealer immediately.

Use of gasoline with an octane number lower

than 87 can cause engine failure and may void

or not be covered by the New Vehicle Limited

Warranty.
Poor quality gasoline can cause problems such

as hard starting, stalling, and hesitations. If you

experience these symptoms, try another brand

of gasoline before considering service for the

vehicle.

Reformulated Gasoline

Many areas of the country require the use of

cleaner burning gasoline referred to as

“Reformulated Gasoline”. Reformulated

gasoline contains oxygenates and are

specifically blended to reduce vehicle

emissions and improve air quality.
The use of reformulated gasoline is

recommended. Properly blended reformulated

gasoline will provide improved performance

and durability of engine and fuel system

components.

WARNING!

To avoid the risk of forcing the vehicle off the

jack, do not tighten the lug nuts/bolts fully

until the vehicle has been lowered. Failure to

follow this warning may result in personal

injury.

20_VF_OM_EN_USC_t.book Page 190

Summary of Contents for PROMASTER 2020





































































































































































































































































Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands

RAM Commercial PROMASTER 2020, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands