manualshive.com logo in svg

RAM Commercial PROMASTER 2020, Owner'S Manual

The RAM Commercial PROMASTER 2020 is a versatile and reliable work vehicle built for efficiency. For a convenient and easy-to-use guide on operating this exceptional model, our Quick Reference Manual is available for free download from our website. Access your user manual today and maximize the potential of your PROMASTER 2020.

Share
Download
background image

138

IN CASE OF EMERGENCY

 

Sealing A Tire With Tire Service Kit

(A) Whenever You Stop To Use Tire Service 

Kit:

1. Pull over to a safe location and turn on the 

vehicle’s Hazard Warning Flashers.

2. Verify that the valve stem (on the wheel with 

the deflated tire) is in a position that is near 

to the ground. This will allow the Tire Service 

Kit Hoses (3) and (5) to reach the valve 

stem and keep the Tire Service Kit flat on 

the ground. This will provide the best 

positioning of the kit when injecting the 

sealant into the deflated tire and running 

the air pump. Move the vehicle as 

necessary to place the valve stem in this 

position before proceeding.

3. Place the transmission in PARK (P) (auto 

transmission) or in Gear (manual 

transmission) and place the ignition in the 

OFF position.

4. Apply the parking brake.

(B) Setting Up To Use Tire Service Kit:

1. Push in the Mode Select Knob (2) and turn 

to the Sealant Mode position.

2. Uncoil the Sealant Hose (3) and then 

remove the cap from the fitting at the end of 

the hose.

3. Place the Tire Service Kit flat on the ground 

next to the deflated tire.

4. Remove the cap from the valve stem and 

then screw the fitting at the end of the 

Sealant Hose (3) onto the valve stem.

5. Uncoil the Power Plug (7) and insert the plug 

into the vehicle’s 12 Volt power outlet.

NOTE:

Do not remove foreign objects (e.g., screws or 

nails) from the tire.

A loose Tire Service Kit thrown forward in a 

collision or hard stop could endanger the 

occupants of the vehicle. Always stow the 

Tire Service Kit in the place provided. 

Failure to follow these warnings can result 

in injuries that are serious or fatal to you, 

your passengers, and others around you.

Take care not to allow the contents of Tire 

Service Kit to come in contact with hair, 

eyes, or clothing. Tire Service Kit sealant is 

harmful if inhaled, swallowed, or absorbed 

through the skin. It causes skin, eye, and 

respiratory irritation. Flush immediately 

with plenty of water if there is any contact 

with eyes or skin. Change clothing as soon 

as possible, if there is any contact with 

clothing.

Tire Service Kit Sealant solution contains 

latex. In case of an allergic reaction or rash, 

consult a physician immediately. Keep Tire 

Service Kit out of reach of children. If swal

-

lowed, rinse mouth immediately with plenty 

of water and drink plenty of water. Do not 

induce vomiting! Consult a physician imme

-

diately.

WARNING!

 (Continued)

20_VF_OM_EN_USC_t.book  Page 138  

Summary of Contents for PROMASTER 2020





































































































































































































































































Reviews:

No comments

Related manuals for PROMASTER 2020

Samsung HF1000 User Manual preview
HF1000
Brand: Samsung Pages: 133
Wagan 2591 User Manual preview
2591
Brand: Wagan Pages: 12
Rightline Gear Car Top Duffle Bag Setup Manual preview
Car Top Duffle Bag
Brand: Rightline Gear Pages: 2
TUFLOC Dodge Charger TufBox Installation Instructions Manual preview
Dodge Charger TufBox
Brand: TUFLOC Pages: 6
Metra Electronics 95-8202 Installation Instructions Manual preview
95-8202
Brand: Metra Electronics Pages: 20
Mercedes-Benz AMG E-Class Supplement Manual preview
AMG E-Class
Brand: Mercedes-Benz Pages: 54
Sanitas SMG 245 Instructions For Use Manual preview
SMG 245
Brand: Sanitas Pages: 36
Aries 205039 Installation Manual preview
205039
Brand: Aries Pages: 5
Mercedes-Benz MY17 c-class Operator'S Manual preview
MY17 c-class
Brand: Mercedes-Benz Pages: 354
Mynew Portable Car Umbrella User Manual preview
Portable Car Umbrella
Brand: Mynew Pages: 5
Honda 2007 Fit User Information preview
2007 Fit
Brand: Honda Pages: 24
GROM Audio VLINE Installation Manual preview
VLINE
Brand: GROM Audio Pages: 20
Brodit Getac T800 Quick Start Manual preview
Getac T800
Brand: Brodit Pages: 2
Saturn 2009 OUTLOOK Owner'S Manual preview
2009 OUTLOOK
Brand: Saturn Pages: 432
Acura 2011 RDX Navigation System Advanced Technology Manual preview
2011 RDX Navigation System
Brand: Acura Pages: 16
Magneti Marelli AC911 Installation Instruction preview
AC911
Brand: Magneti Marelli Pages: 3
Honda 2000 RL Owner'S Manual preview
2000 RL
Brand: Honda Pages: 330
Mazda 2014 CX-9 User Manual preview
2014 CX-9
Brand: Mazda Pages: 604

Brands by name

Popular brands

Load more brands