RAM Commercial PROMASTER 2020 Owner'S Manual Download Page 213

Page: 213 / 260

MULTIMEDIA

211

This functionality is only available for radios

equipped with a Satellite receiver. To receive

satellite radio, the vehicle needs to be outside

with a clear view to the sky.
If the screen displays Acquiring Signal, you may

need to change the vehicle’s position to receive

a signal. In most cases, the satellite radio does

not receive a signal in underground parking

garages or tunnels.

Setting The Presets

Presets

The Presets are available for all Radio Modes,

and are activated by pressing any of the four

Preset buttons, located at the top of the screen.
When you are receiving a station that you wish

to commit into memory, press and hold the

desired numbered button for more that two

seconds or until you hear a confirmation beep.
The Radio stores up to 12 presets in each of the

Radio modes. Four presets are visible at the top

of the radio screen.
Pressing the All button on the radio home

screen will display all of the preset stations for

that mode.

Audio Settings

1. Push the Settings button located on the

faceplate.

2. Then scroll down and press the Audio

button located on the touchscreen to open

the Audio menu.

3. The Audio Menu displays the following

options for you to customize your audio

settings.

Equalizer
Press the Equalizer button to adjust the Bass,

Mid and Treble. Use the + or – buttons to adjust

the equalizer to your desired settings. Press the

back arrow button when completed.
Balance/Fade
Press the Balance/Fade button to adjust the

sound from the speakers. Use the arrow button

to adjust the sound level from the front and rear

or right and left side speakers. Press the Center

C button to reset the balance and fade to the

factory setting. Press the back arrow button

when completed.
Speed Adjustable
Press the Speed Adjusted Volume button to

select between OFF, 1, 2 or 3. This will increase

the radio volume relative to a increase in

vehicle speed. Press the back arrow button

when completed.

20_VF_OM_EN_USC_t.book Page 211

Summary of Contents for PROMASTER 2020





































































































































































































































































Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands

RAM Commercial PROMASTER 2020, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands