RAM Commercial PROMASTER 2020 Owner'S Manual Download Page 212

Page: 212 / 260

210

MULTIMEDIA

During a Seek Down function, if the radio

reaches the starting station after passing

through the entire band two times, the radio will

stop at the station where it began.
Fast Seek Down
Press and hold the Seek Down button on the

touchscreen to advance the radio through the

available stations or channel at a faster rate.

The radio stops at the next available station or

channel when the button on the touchscreen is

released.

Direct Tune

The Direct Tune touchscreen is available in AM,

FM and SXM (if equipped) radio modes and can

be used to direct tune the radio to a desired

station or channel. Press the Tune button

located at the bottom of the radio screen.
Press the available number button to begin

selecting a desired station. Once a number has

been entered, any numbers that are no longer

possible (stations that cannot be reached) will

become deactivated/grayed out.
If you accidentally entered the wrong station

number, press the CLR button to clear the radio

station numbers and re-enter the correct

station number.
Once the last digit of a station has been

entered, the Direct Tune touchscreen will close

and the system will automatically tune to that

station. The selected Station or Channel

number is displayed in the Direct Tune text box.

SiriusXM® Satellite Radio Mode — If

Equipped

SiriusXM® Satellite Radio uses direct

satellite-to-receiver broadcasting technology to

provide clear, coast to coast radio content.

SiriusXM® is a subscription based service.
Get over 160 channels on your satellite radio,

and enjoy all you want, all in one place. Hear

commercial-free music plus sports, news, talk

and entertainment. Get all the premium

programming, including Howard Stern, every

NFL® game, Oprah Radio, every MLB® and

NHL® game, every NASCAR® race, Martha

Stewart and more. And get 20+ extra channels,

including SiriusXM® Latino, offering 20

channels of commercial free music, news, talk,

comedy, sports and more dedicated to Spanish

language programming.
SiriusXM® services require subscriptions, sold

separately after the trial included with the new

vehicle purchase. If you decide to continue your

service at the end of your trial subscription, the

plan you choose will automatically renew and

bill at then-current rates until you call

SiriusXM® at 1-866-635-2349 to cancel. See

SiriusXM® Customer Agreement for complete

terms at www.siriusxm.com (US Residents) or

www.siriusxm.ca (Canadian Residents). All fees

and programming subject to change. The

satellite service is available only to those at

least 18 and older in the 48 contiguous US and

D.C. The SiriusXM® satellite service is also

available in PR (with coverage limitations). Our

Internet radio service is available throughout

the satellite service area and in AK and HI.

all related marks and logos are trademarks of

SiriusXM® Radio Inc.

20_VF_OM_EN_USC_t.book Page 210

Summary of Contents for PROMASTER 2020





































































































































































































































































Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands

RAM Commercial PROMASTER 2020, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands