RAM Commercial PROMASTER 2020 Owner'S Manual Download Page 236

Page: 236 / 260

234

MULTIMEDIA

Use With Care
Use of TomTom® navigation while driving still

means that you need to drive with due care and

attention.
Safety Settings
We recommend using the safety settings to

make your driving as safe as possible. These

are some of the options included in the safety

settings:



Show safety reminders



Warn when driving faster than allowed

You can also drive more safely by using voice

commands to control navigation.
Refer to “Settings” earlier in this section to learn

more about how to control safety and warning

settings.
This Document
Great care was taken in preparing this

document. Constant product development may

mean that some information is not entirely up to

date. The information in this document is

subject to change without notice.

TomTom® shall not be liable for technical or

editorial errors or omissions contained herein,

nor for incidental or consequential damages

resulting from the performance or use of this

document. This document contains information

protected by copyright. No part of this

document may be photocopied or reproduced

in any form without prior written consent from

TomTom® N.V.

TomTom® and the "two hands" logo are

registered trademarks of TomTom® N.V. or one

of its subsidiaries. Please see

www.tomtom.com/en_us/legal/ for warranties

and end user license agreements applying to

this product.
© 2019 TomTom®. All rights reserved. This

material is proprietary and the subject of

protection and/or other intellectual property

rights owned by TomTom® or its suppliers. The

use of this material is subject to the terms of a

license agreement. Any unauthorized copying or

disclosure of this material will lead to criminal

and civil liabilities.

reserved.
The software included in this product contains

copyrighted software that is licensed under the

GPL. A copy of that license can be viewed in the

License section. You can obtain the complete

corresponding source code from us for a period

of three years after our last shipment of this

product. For more information, visit https://

www.tomtom.com/en_gb/opensource or

contact your local TomTom® customer support

team via us.support.tomtom.com/app/

answers/list. Upon request, we will send you a

CD with the corresponding source code.
Linotype, Frutiger and Univers are trademarks

of Linotype GmbH registered in the U.S. Patent

and Trademark Office and may be registered in

certain other jurisdictions. MHei is a trademark

of The Monotype Corporation and may be

registered in certain jurisdictions.

20_VF_OM_EN_USC_t.book Page 234

Summary of Contents for PROMASTER 2020





































































































































































































































































Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands

RAM Commercial PROMASTER 2020, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands