RAM Commercial PROMASTER 2020 Owner'S Manual Download Page 135

Page: 135 / 260

IN CASE OF EMERGENCY

133

Jack Warning Label

Assembled Jack

1. Loosen (but do not remove) the wheel lug

bolts by turning them counterclockwise

one turn while the wheel is still on the

ground.

2. There are two jack engagement locations

on each side of the vehicle body.

Jacking Engagement Locations



Do not get under the vehicle when it is on a

jack. If you need to get under a raised

vehicle, take it to a service center where it

can be raised on a lift.



Only use the jack in the positions indicated

and for lifting this vehicle during a tire

change.



If working on or near a roadway, be

extremely careful of motor traffic.



To assure that spare tires, flat or inflated,

are securely stowed, spares must be

stowed with the valve stem facing the

ground.

WARNING!

(Continued)

CAUTION!

Do not attempt to raise the vehicle by jacking

on locations other than those indicated in the

Jacking Instructions for this vehicle.

CAUTION!

Do not attempt to raise the vehicle by jacking

on locations other than those indicated.

20_VF_OM_EN_USC_t.book Page 133

Summary of Contents for PROMASTER 2020





































































































































































































































































Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands

RAM Commercial PROMASTER 2020, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands