RAM Commercial PROMASTER 2020 Owner'S Manual Download Page 174

Page: 174 / 260

172

SERVICING AND MAINTENANCE

Tire And Loading Information Placard

This placard tells you important information

about the:

1. Number of people that can be carried in

the vehicle.

2. Total weight your vehicle can carry.

3. Tire size designed for your vehicle.

4. Cold tire inflation pressures for the front,

rear, and spare tires.

The vehicle maximum load on the tire must not

exceed the load carrying capacity of the tire on

your vehicle. You will not exceed the tire's load

carrying capacity if you adhere to the loading

conditions, tire size, and cold tire inflation

pressures specified on the Tire and Loading

Information placard in “Vehicle Loading” in the

“Starting And Operating” section of this manual.

NOTE:

Under a maximum loaded vehicle condition,

gross axle weight ratings (GAWRs) for the front

and rear axles must not be exceeded.

For further information on GAWRs, vehicle

loading, and trailer towing, refer to “Vehicle

Loading” in the “Starting And Operating”

section of this manual.

To determine the maximum loading conditions

of your vehicle, locate the statement “The

combined weight of occupants and cargo

should never exceed XXX kg or XXX lbs” on the

Tire and Loading Information placard. The

combined weight of occupants, cargo/luggage

and trailer tongue weight (if applicable) should

never exceed the weight referenced here.

Steps For Determining Correct Load

Limit—
(1) Locate the statement “The combined

weight of occupants and cargo should

never exceed XXX kg or XXX lbs.” on your

vehicle's placard.
(2) Determine the combined weight of

the driver and passengers that will be

riding in your vehicle.
(3) Subtract the combined weight of the

driver and passengers from XXX kg or

XXX lbs.
(4) The resulting figure equals the

available amount of cargo and luggage

load capacity. For example, if “XXX”

amount equals 1400 lbs. and there will

be five 150 lb passengers in your

vehicle, the amount of available cargo

and luggage load capacity is 650 lbs.

(1400-750 (5x150) = 650 lbs.)
(5) Determine the combined weight of

luggage and cargo being loaded on the

vehicle. That weight may not safely

20_VF_OM_EN_USC_t.book Page 172

Summary of Contents for PROMASTER 2020





































































































































































































































































Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands

RAM Commercial PROMASTER 2020, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands