manualshive.com logo in svg

RAM Commercial PROMASTER 2020, Owner'S Manual

The RAM Commercial PROMASTER 2020 is a versatile and reliable work vehicle built for efficiency. For a convenient and easy-to-use guide on operating this exceptional model, our Quick Reference Manual is available for free download from our website. Access your user manual today and maximize the potential of your PROMASTER 2020.

Share
Download
background image

84

SAFETY

 

Children Too Large For Booster Seats 

Children who are large enough to wear the 

shoulder belt comfortably, and whose legs are 

long enough to bend over the front of the seat 

when their back is against the seatback, should 

use the seat belt in a rear seat. Use this simple 

5-step test to decide whether the child can use 

the vehicle’s seat belt alone:

1. Can the child sit all the way back against 

the back of the vehicle seat?

2. Do the child’s knees bend comfortably over 

the front of the vehicle seat – while the child 

is still sitting all the way back?

3. Does the shoulder belt cross the child’s 

shoulder between the neck and arm?

4. Is the lap part of the belt as low as possible, 

touching the child’s thighs and not the 

stomach?

5. Can the child stay seated like this for the 

whole trip?

If the answer to any of these questions was 

“no”, then the child still needs to use a booster 

seat in this vehicle. If the child is using the lap/

shoulder belt, check seat belt fit periodically 

and make sure the seat belt buckle is latched. 

A child’s squirming or slouching can move the 

belt out of position. If the shoulder belt contacts 

the face or neck, move the child closer to the 

center of the vehicle, or use a booster seat to 

position the seat belt on the child correctly.

Installing Child Restraints In Commercial 

Vehicles

This commercial vehicle is not designed for use 

as a family vehicle and is not intended for 

carrying children in the front passenger seat(s). 

Never install rear-facing child restraints in this 

vehicle. Although the seat belt can be locked to 

secure a child restraint, there are no tether 

anchorages to complete the proper installation 

of a forward-facing child restraint. If you must 

carry a child in a forward-facing child restraint, 

the passenger seat should be moved to the full 

rearward position and the child must be in a 

proper restraint system based on its age, size 

and weight. Follow the instructions below to 

secure the child restraint using the seat belt.

After a child restraint is installed in the 

vehicle, do not move the vehicle seat 

forward or rearward because it can loosen 

the child restraint attachments. Remove 

the child restraint before adjusting the 

vehicle seat position. When the vehicle seat 

has been adjusted, reinstall the child 

restraint.

When your child restraint is not in use, 

secure it in the vehicle with the seat belt or 

LATCH anchorages, or remove it from the 

vehicle. Do not leave it loose in the vehicle. 

In a sudden stop or accident, it could strike 

the occupants or seatbacks and cause 

serious personal injury.

WARNING!

 (Continued)

WARNING!

Never allow a child to put the shoulder belt 

under an arm or behind their back. In a crash, 

the shoulder belt will not protect a child 

properly, which may result in serious injury or 

death. A child must always wear both the lap 

and shoulder portions of the seat belt 

correctly.

20_VF_OM_EN_USC_t.book  Page 84  

Summary of Contents for PROMASTER 2020





































































































































































































































































Reviews:

No comments

Related manuals for PROMASTER 2020

Jeep UNIVERSAL CJ-2A Operation Data preview
UNIVERSAL CJ-2A
Brand: Jeep Pages: 27
Jeep RENEGADE 2016 User Manual preview
RENEGADE 2016
Brand: Jeep Pages: 228
Jeep PATRIOT 2013 User Manual preview
PATRIOT 2013
Brand: Jeep Pages: 108
Jeep PATRIOT 2013 Owner'S Manual preview
PATRIOT 2013
Brand: Jeep Pages: 525
Jetter JX3-BN-CAN Manual preview
JX3-BN-CAN
Brand: Jetter Pages: 4
K&K M5700N Manual preview
M5700N
Brand: K&K Pages: 8
K&K M4700 Manual preview
M4700
Brand: K&K Pages: 20
K&K M3500N Manual preview
M3500N
Brand: K&K Pages: 6
K&K M2500 Manual preview
M2500
Brand: K&K Pages: 3
K&K M1500 Manual preview
M1500
Brand: K&K Pages: 3
Carefree Slideout Cover Service Manual preview
Slideout Cover
Brand: Carefree Pages: 12
iArmor IA-N179 Manual preview
IA-N179
Brand: iArmor Pages: 6
Brodit ProClip 804438 Installation Instructions preview
ProClip 804438
Brand: Brodit Pages: 2
Mazda 2006 RX-8 Service Highlights preview
2006 RX-8
Brand: Mazda Pages: 122
GMC TopKick 2007 Owner'S Manual preview
TopKick 2007
Brand: GMC Pages: 430
Toyota SUPRA 1987 Electrical Wiring Diagram preview
SUPRA 1987
Brand: Toyota Pages: 165
PUTCO Molle Panels Assembly And Instruction Manual preview
Molle Panels
Brand: PUTCO Pages: 2
Tabernus Peram Hatch-bag Luggage System Installation Instructions Manual preview
Hatch-bag Luggage System
Brand: Tabernus Peram Pages: 10

Brands by name

Popular brands

Load more brands