Radionics Easikey 1000 Plus, Installation And Programming Manual

Page: 43 / 56

74-07579-000-A 2/96 Page 38 © 1996 Radionics, Inc.
Identifying a Key/Card
If someone finds a key/card, you can identify the key/card by presenting it to the
controller's reader and following these steps:
Step Example Display Action
1 Present an Editor key/card to the EK1000’s
internal reader.
2 SEL? Press the KEY/4 key.
3
0000
Present the key/card to the EK1000’s internal
reader.
4
0019 / t1 .
If the key/card exists in the database then the red
and green LEDs will be steady and the key/card
number, alternating with the Access Level and
Time Profile assigned, will be displayed.
Refer to the EK1000/1000 Plus Program
Record Sheet (74-07580-000) for reference of
which user the key/card has been assign to.
Press ESC twice to leave the Editor or make
any changes if necessary.
Voiding Key/Cards (Users) from the EK1000
You can remove a key/card from the database provided you have the key/card or
you know its number.
To Void a key/card use the following procedure:
Step Example Display Action
1 Present an Editor key/card to the EK1000’s
internal reader.
2
SEL? Press the VOID/5 key.
3 0000 The red LED will be lit.
Either: present the key/card to be removed to
the EK1000’s internal reader. If you
present a key/card that does not
exist then there will be a long beep
from the EK1000.
or: type the key/card number and press
SEL/SAVE to confirm,
or: use to select the key/card number
and press SEL/SAVE to confirm.
Valid key/cards that are present in the database
will flash along with the red LED, Invalid
key/cards will flash with red and green LEDs
steady.