74-07579-000-A 2/96
Page 34
© 1996 Radionics, Inc.
User (Key/Card) Numbers
When you add a new key/card to the EK1000, the EK1000 door controller
assigns the key/card a number between 0001 and 1000. Normally when you add
a key/card the controller assigns it the first available number in the list. For
example if a system contained keys 0001, 0002, 0003, 0004 and 0006, the
EK1000 would assign the next key/card added to number 0005. The EK1000
would assign next following key/cards to numbers 0007, 0008 and so on. It is
possible to override the automatic numbering and give a key/card a specific
number, provided the number is not currently being used by another key/card.
It is important to keep a record of key/card numbers you issue and who they
belong to on the
Easikey 1000/1000 Plus Programming Record Sheet
(74-
07580-000). It may be necessary to void a lost key/card at a later date, in which
case, you must know the number given to the lost key/card if you do not have it
in your possession.
Adding or Editing Users
Follow this procedure for adding a new key/card to the EK1000. If you are adding
more than one new key/card, see
Adding Several Keys
on page 36.
Step
Example Display
Action
1
Present an Editor key/card to the EK1000’s
internal reader.
2
SEL?
Press the
KEY/4
key.
3
0000
Present a new key/card to the EK1000’s internal
reader.
4
0019 / t0
..
At this point if both the green and red LEDs come
on then the key already exists in the database and
may be edited (see
Editing a Key
). If this is a new
key/card then the green LED only will flash and
the display will alternate between the next
available key/card number and the Time Profile
and Access Level. This example shows key/card
0019 as the next available number.
At this point you may wish to select your own
number rather than the number given by the
EK1000. If not then go to step 6 below.
To select an alternative number press
SEL/SAVE
, the display will change to 0000.
5
0000
Now either type in the number you require and
press
SEL/SAVE
to confirm the change, or use
the
and keys to go up and down the list of
numbers. Numbers already assigned will flash
with the red and green LEDs steady, free numbers
will alternate with their Time Profile and Access
Level and the green LED flashing. Press
SEL/SAVE
to confirm the number that has been
chosen.
