74-07579-000-A 2/96
Page 29
© 1996 Radionics, Inc.
2 Free Exit/Emergency Override
This option modifies the way that the DC (door contact) and RTE (request to
exit) are monitored.
UNSET
The EK1000 Plus monitors door contact and reader/cable tamper.
(RTE Programmed for Request to Exit)
SET
The EK1000 Plus will give Free Exit report without an alarm when
the door is opened without a valid key/card or request to exit. On all
versions of the EK1000 the RTE gives Emergency Override On
report and unlocks the door when triggered (closed), Emergency
Override Off report and locks the door when the RTE goes back to
the normal condition (opened).
3 RTE Report
This option controls the type of report that the controller prints when RTE is
operated.
UNSET
Request to Exit
SET
Request for Entry
4 Not Used - Leave UNSET
This option will be reserved for future use, and must remain unset for proper
operation.
UNSET
Normal default setting.
SET
Reserved for future use.
5 Set/Reset
This option programs the door to open normally, following the programmed Lock
Release Time, or to operate as a Set/Reset (toggle the output state) engaging
the lock output and remaining engaged until a user presents a valid key/card
again.
UNSET
Presenting a key/card to the reader releases the lock for the time
specified by the Lock Release Time.
SET
Presenting a key/card to the reader releases (engages) the lock
output. It stays in this state until a user presents a key/card again to
the reader, then the lock output will disengages.
