74-07579-000-A 2/96
Page 36
© 1996 Radionics, Inc.
Adding Several Keys
When you want to add several keys or cards at one time, follow the previous
steps used in
Adding or Editing Users
on page 34.
When step 8 is complete,
instead of pressing
ESC
, continue to follow the steps
described here. This feature is also sometimes referred to as Block Adding.
Step
Example Display
Action
9
0020 / t1
.
The green LED will be steady and the next
available key/card number will be alternating with
the same Access Level and Time Profile that was
previously used for the key/card that was just
programmed into the EK1000.
Make any necessary changes to the Access
Level and Time Profile following the steps
mentioned earlier in
Adding or Editing Users
.
You will notice that any changes are carried over
to the next key/card making it very convenient for
bulk adding of key/cards with the same access
requirements.
Present the new key/card to the EK1000’s
internal reader - there is no need to present an
Editor key/card until all the desired key/cards
have been added.
10
0021 / t1
.
0022 / t1
.
0023 / t1
.
Continue presenting new keys and cards, one
after the other, until all key/cards are recorded.
If a key/card is presented that is already in the
database then its number will briefly be displayed
before the display returns to the next available
number.
If you fill the database with 1000 key/cards then
the display will show
FULL
.
11
0024 / t1
.
When finished either press
ESC
or present the
Editor key/card.
12
SEL?
Press
ESC
to leave Editor.
Editing a Key/Card
To change the Access Level or Time Profile assigned to a key/card the EK1000
requires either the key/card itself or the number assigned to the key/card to be in
the Editor’s possession. Edit the key/card using the following procedure.
Step
Example Display
Action
1
Present an Editor key/card to the EK1000’s
internal reader.
2
SEL?
Press the
KEY/4
key.
